Keiser : Service & Support : Preventative Care

Preventative Care Sheet The following maintenance schedule is the recommended system check for all our machines. By taking the recommended maintenance steps you will ensure the long life of your Keiser equipment. Some users have reported using our equipment for over 20 years!
Equipment Maintenance Check			M3 Maintenance Check


	Daily	Clean chrome and paint where applicable	Every Class	Member thoroughly inspect each cycle

		Clean upholstery		Member wipe off sweat

			1st Month-Weekly	Check and re-torque crank arms and pedals
	Weekly	Wax chrome and paint where applicable


		Wax upholstery
			Weekly	Thoroughly inspect each cycle
		Inspect belts

				Clean with warm water and soft towel
		Wash handgrips		Check computer for low battery indication
		Inspect filters
			Monthly	Check and re-torque crank arms and pedals

	Monthly	Check nuts and bolts		Wax those areas most in contact with sweat

		Clean and lubricate cylinder rods		Lubricate T-Handle adjustment threads
		Check frame for any weakening in weld areas and other connections sites.

	Quarterly	Lubricate pivot bushings

		Check exhaust mufflers for discoloration
		Check that compressor is cycling on/off between 100-120 psi

	Annually	Change batteries

Back to Main 1.800.888.7009 FAQ | Terms of Use | Corporate Info | Site Map | Privacy Policy