Racks Platform

Due to overwhelming demand the Keiser Power Rack Platform was created. The platforms are one and a half inches thick topped with 1st Grade 3/4" Maple, sanded, sealed, and finished with three coats of clear hardwood floor finish.  The entire perimeter of the platform is trimmed in steel tubing with cast rounded corners.  The rubber is one and a half inches thick to absorb the shock of the falling weights.  Typical platforms lay 3/4" rubber over the top of a three inch wooden platform which makes for a very noisy weight room.  By separating the rubber from the platform and using one and a half inch thick rubber the noise is reduced significantly.  Keiser's low profile platform, one and a half inches instead of three plus inches, reduces the trip hazard and makes the Keiser Platforms one of the best looking platforms available.

• Trimmed in steel tubing with cast rounded corners to reduce athletic injury.
• 1 ½”  thick construction topped with 1st Grade Maple (sanded, sealed, and triple varnished).
• Impact absorbing rubber separated from the wood work to significantly reduce noise.
• Low profile platform, reduces trip hazards and improves appearance.
• Space for addition of team or club logo.