Back to Main

The Air Advantage | Testimonials | Power Equipment | POWER Training | Contact A Rep | Service & Support

Copyright © 2007 Keiser Corporation. All Rights Reserved

	- No shock loading to connective tissues and joints. - The ability to change resistance at any time w/ f ingertip control. - A consistent variable resistance curve at any speed. - Offers privacy of workload. - Resistance changeable at 1/10 pound increments on Infinity Series - Large Digital display/Counts repetitions. - Equipment of choice in over 70 peer-reviewed research studies on training

Air Resistance Advantages over Weight Stack Provided Resistance

The U.S. Consumer Product Safety Commission reports that sports injuries are on the rise among those aged 25 to 65. They claim the increase in weight training injuries is due to not only age and technique, but also the shock loading to aging joints from weight stack machines. A recent study clearly illustrates the difference between the old method of weight stacks vs. the revolutionary pneumatic resistance provided by Keiser equipment.

Keiser Pneumatic (Blue) - Weight Stack Machine (Red)

Graph 1. It can be seen that the acceleration forces of inertia increase dramatically with a weight stack machine depending upon the speed of movement. Also the weight stack shows a loss of resistance because of gravity and momentum. Keiser pneumatic resistance strength curve remains consistent at all three training speeds. Weight stack cam machines were designed to take into consideration the forces due to acceleration and deceleration (starting and stopping the weight stack) so it can counteract the effects of inertia and momentum. The problem with weight stack machines is that they were designed to work at one restricted speed of movement to counteract the effects of inertia and momentum.

 

"With Keiser's pneumatics you can say goodbye to limits in your training and wellness and do so in a safe manner"

 

 

 

Graph 2 . 4 Second training speed, inertia force load is 20 lbs. greater 2 Second training speed, inertia force load is 60 lbs. greater.

 

 

Graph 3 . 1 Second training speed, inertia force load is 80 lbs. greater.

 

 

 

 

 

That’s why Keiser was invented to provide high resistance with very little inertia (moving mass) and without the dependence upon gravity. The elimination of a weight stack reduces the mass; therefore the force due to acceleration is virtually eliminated, which leaves only pure variable resistant force. The reduction of the acceleration forces and the elimination of dependence on gravity allow the variable resistance strength curve to remain consistent over a wide range of training speeds.Read the the full research study and judge for yourself. [ download pdf ]*

*this link requires Adobe Acrobat reader to view. To save on your computer for later use or for reference right click link and select "save link as" or "save target as" then you may save the pdf onto your computer. Read Keisers "Terms of Use" for information relating to limits of media's usage.